Find the component in the AA-01 diagrams
Use the diagram item number to distinguish a control, cooktop component, door component or main assembly. Match the model revision before following the item to a replacement listing.
Open the NX58F5500SS/AA-01 catalog and five diagram groups at Parts Dr ↗The linked retailer has the full diagram catalog. Our overview contains only the five reviewed references below.
Symptom → identification check
These are investigation paths, not diagnoses or failure-rate rankings.
| What you observe | What to check next | Reference after diagnosis |
|---|---|---|
| Knob visibly damaged | Match the control position and shaft; do not force a valve. | DG64-00472A |
| Oven will not heat | Qualified ignition-system diagnosis; verify bake or broil application. | DG94-00520A |
| Temperature inconsistent | Record cooking mode and error code; distinguish sensing from heating faults. | DG32-00002B |
| Control/display issue | Qualified control-system diagnosis before ordering electronics. | DE92-02588G |
| Oven floor visibly damaged | Inspect only when cool; identify the panel in the model diagram. | DG61-00570A |
Keep the model revision attached
NX58F5500SS identifies this Samsung gas-range family. Our current part evidence covers NX58F5500SS/AA-01. Other revisions are not included in this review. The family name printed in a sales listing is not enough to confirm a part, so copy the complete appliance label before selecting a version above.
The five references shown here have two catalog publishers supporting the AA-01 relationship. This is a documented catalog match, not a physical installation test. The overview is a limited set of useful part records, not a complete exploded diagram or a list of parts that every owner needs. Follow the linked model catalog when you need to identify a component beyond this set.
Knob damage or burner trouble?
DG64-00472A identifies the burner control knob in the reviewed catalogs. With the range off and cool, visible damage can help explain a loose or broken knob. A burner that will not light, a valve that does not turn normally or a control that behaves unpredictably needs separate diagnosis. A new knob does not repair the valve or ignition system.
Record the control position, full model and visible damage. Do not force the shaft or try to adapt a similar knob. Compare the diagram and package details on the individual part page before ordering.
Oven not heating or temperature inconsistent
The model catalogs list DG94-00520A as an oven igniter and DG32-00002B as a temperature sensor. These are distinct components. Failure to heat or uneven results can have more than one cause, so the symptom alone does not choose between them. Record the cooking mode, set temperature and any error message, then arrange qualified diagnosis of the relevant system.
DE92-02588G is the main control board reference in this reviewed set. A display or heating issue does not automatically establish board failure. Confirm the complete board suffix and retailer return terms after diagnosis, especially before installing an electronic part. Do not expose live wiring or probe a running appliance to choose a component from this list.
Visible damage to the oven floor
DG61-00570A is the oven bottom-panel reference. Inspect only when the oven is off and cool, and compare the panel with the model diagram. The panel is not an alternative to the igniter or temperature sensor when the complaint is a heating fault. Ask the retailer what mounting hardware is supplied before ordering a replacement.
Use the symptom notes as a starting point
These checks group issues by the affected component and reflect the problem categories in the linked model catalogs. They are not measured failure rates, a diagnosis, or a recommendation to replace several parts together. Use the manufacturer manual for operation and qualified service for gas, electrical or uncertain internal work.
If your full suffix is not listed, leave the version unselected and use the complete-model search or prepare a fitment question. Do not change AA-00 or AA-02 to AA-01 just to get a match. Keep the original model label and part number with any retailer correspondence so the final confirmation refers to your appliance.
Before you choose
Can I use AA-01 evidence for another revision?
No. Check the complete model on the individual part page. A shared family, brand or part type does not establish fit.
What if my model is missing?
Our catalog is a reviewed subset. Keep the full suffix and ask the retailer to confirm the exact diagram item. An unlisted model is unknown, not a confirmed mismatch.
Prepare a fitment question →Sources to check
Reviewed October 21, 2026. Use the manual for your exact model; catalog information is not a physical fit test.
Editorial update: 2026-10-21